Designed for 19U rack installation the KioKio was developed for the professional audio sector. Home Theatre installers had been using our SB301 and in their words found it 'bullet proof'; used in demonstrations it had been trucked around the USA and while the outside was battered by less than gentle handling the electronics just refused to give up.
So much of the movie experience is the audible part of the show and amplifiers used in dedicated home theatre installations cannot give up. Reliability is the key for professional installers that have to service their installations so this unit meets their needs wonderfully.
Of course it's a Plinius product so it looks good too and sometimes it's a shame to see it hidden in a rack. Its modern slim line design graces any audio system cabinet when used for dedicated two channel audio.
310 watts RMS per channel into 8 ohms.
470 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion
20Hz to 20kHz ±0.2dB
-3dB at 70kHz
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping
100A short duration peak per channel Fuse protected
+0° at 20Hz and -14° 20kHz
HUM & NOISE
100dB below rated output 20Hz to 20kHz, A-weighted
RCA Inputs: 32dB
Balanced Inputs: 38dB
1.6A (370W) Class AB Idle
0.2A (46W) Standby
Height: 220mm (8 3/4 ")
Width: 400mm (15 3/4")
Depth: 420mm (16 3/4")
Weight: 32kg (70lb)