Nauja prekė
audio technica AT-OC9/III patefono galvutė
Type | Dual Moving Coil |
Frequency Response | 15 - 50,000Hz |
Body Material | Aluminium |
Channel Separation | 30dB (1kHz) |
Output Channel Balance | 0.5dB (1kHz) |
Output Voltage | 0.4mV (1kHz and 5cm/sec.) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force Range | 1.8 - 2.2g (2.0g standard) |
Stylus Shape | Special Line contact stylus (curvature radius: ) |
Stylus Curvature Radius | 40 x 7µm |
Stylus Construction | Nude Square Shank |
Cantilever | 0.26 mm diameter solid boron |
Coil Impedance | 12Ω (1kHz) |
Coil Inductance | 25 µm (1kHz) |
DC Resistance | 12Ω |
Static Compliance | 35×10-6cm/dyne |
Dynamic Compliance | 18×10-6cm/dyne (100Hz) |
Recommended Load Impedance | Min 100Ω |
Weight | 8.0g |
Dimensions | 17.3 (H) x 16.8 (W) x 25.7 (L) mm |
Replacement Stylus | When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price. |
Accessories Included | One non-magnetic screwdriver; one brush; two washers; two 12mm mounting screws; two nuts; two 18mm mounting screws; one plastic protector; one set of PCOCC Lead Wires (AT6101) |