Nauja prekė
audio technica AT33PTG/II patefono galvutė
Type | Dual Moving Coil |
Mounting | 1/2" Centers |
Frequency Response | 15 - 50,000Hz |
Body Material | Aluminium/Synthetic Resin |
Channel Separation | 30dB (1kHz) |
Output Channel Balance | 1dB (1kHz) |
Output Voltage | 0.3mV (1kHz and 5cm/sec.) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force Range | 1.8 - 2.2g (2.0g standard) |
Stylus Shape | MicroLine™ |
Stylus Curvature Radius | Micro linear |
Stylus Construction | Nude Square Shank |
Cantilever | Gold-plated solid boron |
Coil Impedance | 10Ω (1kHz) |
Coil Inductance | 22µH (1kHz) |
DC Resistance | 10Ω |
Static Compliance | 40×10-6cm/dyne |
Dynamic Compliance | 10×10-6cm/dyne (100Hz) |
Terminal Pins | Brass |
Recommended Load Impedance | Min 100Ω |
Weight | 6.9g |
Dimensions | H16×W16.6×D26.5mm |
Replacement Stylus | When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price. |
Accessories Included | 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101) |