Audio System F2.400

The F2 are stereo amplifiers with high dynamic stage, able to handle low impedance speaker systems. The high amount of current available to it quadruples the power in bridged mono mode, turning a "Small" 230 watts per channel into a Monster 1250 Watt RMS! It is able to integrate independently adjustable and reversible crossovers are designed to work in multi-amplification, as elements of a powerful engine SPL branded audio system. 

Their energy is concentrated always expressed in respect of Music, enviable qualities of timbre, technical features first class. Big power in a compact size!

Specifiations

• 2x170 WRMS @ 4OHM 
• 2x280 WRMS @ 2OHM 
• 1x600 WRMS @ 4OHM 
• 1x850 WRMS @ 2OHM SUBWOOFER 
• Dynamic Stereo Power @ 2ohm: x2 320 Watt 
• Load impedance min. Stereo: 2 Ohm 
• Load impedance min. Bridged Mono: Subwoofer 2 Ohm load on 
• Damping Factor @ 4 Ohm:> 400 
• Input sensitivity range: 0.17 4.3 mV 
• Input impedance:> 11 Kohm 
• Filter [amount] Type: [1] HP + [ 1] LP 
• Operating band Filter: (HP 20,150) + (45,300 LP) Hz 
• Filter Slope: 12 dB / oct. 
• Frequency Response-3dB: 10 Hz 165,000 
• Distortion THD @ 1 KHz - 90% rated power. 4ohm: <0.025% 
• distortion DIM - 90% rated power. 4ohm: <0.015% 
• S / N Ratio - 22KHz 10Hz - 90% rated power.: 103 dB 
• Signal / noise ratio "A" weighted - 22KHz 10Hz - 90% rated power.: 106 dB 
• Supply voltage range: 10.5, 16 Volt, min. power cable for 5 mt. Length - Metric: 12 mm2 
• Maximum input current @ 4ohm Stereo: 32 A 
• Maximum input current Mono bridged @ 4 Ohm: 56 A 
• Quiescent current - no input: 0.75 A 
• Minimum current consumption - amplifier off: 2 mA 
• Fuses : 2x 30A 
• Weight: 2.8 kg 
• Dimensions: 220x320x50