Steg K1.2500

Nauja prekė

Steg K1.2500 stiprintuvas

Smulkiau

Kaina su PVM 545,00 €

- +

Pridėti palyginimui

 
Apie prekę

A feature of STEG Class D amplifiers line is the very low distortion that are able to maintain even at very low loads. Thanks to LOW TOLERANCE OF PASSIVE COMPONENTS AND THE LAYOUT thoughtful design, that reduce to a minimum the loss of power and make excellent performances. The components used is of the type selected and of particular value, are used in low tolerance resistors and capacitors, coupling in high linearity with low thermal drift and polyester capacity made specifically for audio applications. The choice of each individual device has been studied in every detail, every element finds its best placement in the delicate balance of the electrical system in order to ensure maximum performance, invariable in time.

PROTECTION SYSTEM
The K1 | 25000 integrates a two protection systems a global managed by a microprocessor that has the task to perform, in a continuous manner, the control of the following functions:
Output short circuit
Direct current to the loudspeaker leaders
Increase in temperature
Muting the switch-on
Supply voltage out of range
Intelligent fan control "INTELLISPEED"
The numerous "sensors" on the circuit sending a continuous data stream that is processed at high speed. Thanks to dedicated software, the protection system reacts instantaneously, intervening appropriately and reporting any malfunctions via the LEDs on the control panel. The other protection system is managed by the modulator which controls the switching circuit on the final stage

POWER:

Power 4 ohms monoWatt RMS - 11 to 14.4 Volt 750 x 1
Power 2 ohms monoWatt RMS - 11 to 14.4 volts 1400 x 1
Power 1 ohm monoWatt RMS - 11 to 14.4 volts 2500 x 1

SENSITIVITY 'ENTRANCE:

Volts RMS 0.2 V - 5 V

DIMENSIONS:

500 x 56 x 232 mm

WEIGHT:

6.47 Kg

 
Charakteristikos
Kanalų skaičius1 kanalo

30 kitos prekės toje pačioje kategorijoje:

Meniu

Palyginti 0