JL Audio 13TW5V2-4

Nauja prekė

JL Audio 13TW5V2-4 žemų dažnių garsiakalbis

Smulkiau

Kaina su PVM 830,00 €

- +

Pridėti palyginimui

 
Apie prekę

General Specifications

Continuous Power Handling (RMS)600 W
Recommended Amplifier Power (RMS)250 - 600 W
Nominal Impedance (Znom)4 Ω

Physical Specifications

Nominal Diameter13.5 in / 345 mm
Overall Diameter (A)A1: 14.2 in / 361 mm
A2: 13.0 in / 330 mm
Mounting Hole Diameter (B)12.5 in / 318 mm
Bolt Hole Circle Diameter (C)13.5 in / 343 mm
Motor Outer Diameter (D)6.75 in / 171 mm
Mounting Depth (E)2.625 in / 67 mm
Driver Displacement0.052 cu ft / 1.47 L
Net Weight20.5 lb / 9.3 kg

Parameters

Free Air Resonance (Fs)27.61 Hz
Electrical “Q” (Qes)0.553
Mechanical “Q” (Qms)10.692
Total Speaker “Q” (Qts)0.526
Equivalent Compliance (Vas)2.13 cu ft / 60.31 L
One-Way Linear Excursion (Xmax)*0.433 in / 11 mm
Reference Efficiency (no)0.23%
Efficiency (1 W / 1 m)**85.63 dB SPL
Effective Piston Area (Sd)98.26 sq in / 0.0634 sq m
DC Resistance (Re)3.513 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Sealed Enclosure Specifications

Wall Thickness0.75 in / 19 mm
Front Baffle Thickness0.75 in / 19 mm
Volume (net int.)0.80 cu ft / 22.6 L
External Width (W)19 in / 483 mm
External Height (H)15 in / 381 mm
External Depth (D)7.75 in / 197 mm
F341.42 Hz
Fc52.84 Hz
Qtc1.007

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. 
* All specifications are subject to change without notice.

Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

Ported Enclosure Specifications

Wall ThicknessN/A
Front Baffle ThicknessN/A
Volume (net int.)N/A
External Width (W)N/A
External Height (H)N/A
External Depth (D)N/A
Internal Slot Port Width (SW)N/A
Internal Slot Port Height (SH)N/A
Internal Slot Port Length (SL)N/A
Port Extension Length (EL)N/A
Tuning Frequency (Fb)N/A
F3N/A
* Ported Enclosure not recommended for this subwoofer driver

Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

 
Charakteristikos
Skersmuo in13" (34.5cm)

30 kitos prekės toje pačioje kategorijoje:

Meniu

Palyginti 0