Nauja prekė
audio technica AT-LP3 patefonas baltas
Turntable | |
---|---|
Type | Fully Automatic, Belt-Drive |
Motor | DC motor |
Speeds | 33-1/3 RPM, 45 RPM |
Turntable Platter | Die-cast aluminium |
Wow and Flutter | Less than 0.2% WRMS (33 1/3 RPM) at3kHz |
Signal-to-Noise Ratio | > 60 dB |
Output Level | “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec |
Phono Pre-Amp Gain | 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised |
Power Supply Requirements | 220 to 240 V / 50, 60 Hz |
Power Consumption | 2W |
Dimensions | 435 mm ×353 mm×128 mm (W×D×H) |
Weight | 5.2kg |
Accessories Included | Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable |
Cartridge & Stylus | |
---|---|
Model | AT91R |
Type | VM Dual Magnet |
Output Voltage | 3.5mV (mV at 1kHz, 5 cm/sec) |
Vertical Tracking Force Range | 1.5 to 2.5g (standard 2.0g) |
Stylus Construction | 0.6 mil bonded conical |
Cantilever | Aluminium pipe |
Recommended Load Impedance | 47,000 ohms |
Weight | 5.0g |
Headshell | |
---|---|
Model | AT-HS3 |
Weight | 11.1g |
Overhang Adjustment | 8mm |
Tone arm | |
---|---|
Type | Static balanced straight shaped with soft damping control |
Effective Length | 221.5mm |
Overhang | 19mm |
Maximum Tracking Error Angle | Less than 3° |
Stylus Pressure Adjustment Range | 1 to 4g |
Applicable Cartridge Weight | 14.5 to 20g |
Anti-skating Range | 0 - 3 g |